|
|
|
|
| |
 |
 |
|
 |
|
Buy Now:
Red Oil
Blue Oil
|
|
| S&B’s Precision Cleaning & Oiling Kit allows vehicle owners to properly maintain their high
performance air filters by precisely applying the correct amount of oil. The clearly marked bottle and
easy-to-use applicator allow the user to measure and apply the proper amount oil for each
application. S&B has conducted extensive testing with the Precision Cleaning Kit to ensure that it can
be used on most high performance filters available today. |
|
 |
Quickly and accurately restore your high performance air filter to like-new condition |
|
|
Works on most high performance air filters brands |
|
|
Takes the guess work out of cleaning and oiling your performance air filter |
|
| Directions: |
| Click here for video instructions in new window. |
|
|
|
|
Remove and clean the filter from your vehicle. Clean sealing area of filter and filter housing with a clean
soft clean rag. Do not start your vehicle without a filter
installed. Shake or lightly tap the filter on a hard surface
to remove and loosen large particles and debris. A soft
brush many be used to loosen large pieces of debris or
bugs. Make note of which side of the filter has trapped
the dirt. Use S&B’s Filter Cleaner to clean the filter.
(See provided materials for complete instructions.)
|
|
|
|
Fill applicator bottle with the correct amount of oil. Rotate the Squeeze Bottle of Oil with the cap facing
downward. Make note of your starting point on the
measurement gauge to make sure that the proper
amount of oil is dispensed. When reoiling a filter, it is
critical to place the oil on the side where the dirt will
accumulate. Using the applicator bottle, place a drop
of oil on the peak of each pleat where it meets
urethane (rubber).
|
|
|
|
Allow oil to bleed for 20-30 minutes, then apply remaining oil to any white areas and re-install air filter. After allowing the oil to bleed for 20-30 minutes, inspect
the filter for any white areas where the oil did not cover.
With the remaining oil in the Applicator, apply a small
amount of oil to those white areas. Apply the correct
amount of oil (+ 5 grams) is critical to proper
performance of the filter. DO NOT over oil your filter.
|
|
|
To View Other Cleaning Products, Click Below |
|
|
|
| |
|
|
|
|
