Log In Cart
Log In

Create An Account

Log In Cart
Your Shopping Cart Is Empty
We are still manufacturing and shipping products. Thank you for your support. Last Updated: May 28, 2020
Search By Vehicle

Install Instructions for 75-5004

Part#: 75-5004

Print

Vehicle Application

  • YEAR: 2005-2008
  • MAKE: FORD
  • MODEL: Mustang
  • ENGINE: 4.0L V6

Note:

This intake kit may not fit with the following Aftermarket Parts installed:
  • Body Lift or Lowering Kit
  • Custom Hood
  • Throttle Body Spacer / Upgrade

Tools Required

  • Phillips Screwdriver
  • 5/16 nut driver or Flat head screwdriver
  • 3/8 wrench or socket
  • 1/2 wrench & socket
  • 12mm socket
  • 10mm wrench ratchet
  • Socket extension

Note: Approximate Install Time: 1 Hr 00 Mins.

S&B Filter Maintenance

KF-1019-1 Cotton Cleanable : If the enclosed filter is RED, it came pre-oiled from the factory. Click here for exact oil amount required for cleaning.

CARB Status - N/A

Before You Start

  • Please read the entire product guide before proceeding.
  • Ensure all parts are present.
  • If you are missing any of the components, call our customer support at (909) 947-0015.
  • Do not work on your vehicle while the engine is hot.
  • Make sure the engine is turned off and the vehicle is in Park or the Parking Brake is set.

Related Products

Emission Standard

The California Air Resource Board (CARB) requires that an E.O. identification label be applied to the vehicle in order to pass a smog check inspection when a Performance Intake Kit has been installed. You must place the E.O. label provided on or near the intake kit after installation so that a smog check technician can easily verify the E.O. number. Check the status of the exemption process by looking up a specific part number at www.sbfilters.com. The CARB Exemption number and/or status is listed under the Product Details section for each part number. If the status shows as “Pending,” CARB has yet to issue an exemption. Products that have not been issued an EO number are street legal in most states, but may not be used on emission controlled vehicles in the state of California and are for off-road use only. If you purchased your kit from S&B Filters directly, we will automatically mail you your Exemption Sticker when it is issued to us. If you purchased your kit from an authorized S&B Filters Dealer, log onto our web site and register to receive your Exemption Sticker.

back to top button