Cart Total
FEED MORE AIR TO YOUR INTAKE SYSTEM
Our Jeep Air Hood Scoops feed more cool air to your intake system. More cool air equals better performance and increased power. Designed to mirror the OEM design, but also give you a more aggressive look.
GET MAXIMUM RAM AIR
S&B hood scoops feed more cold air to your compatible S&B Cold Air Intake system. The hood scoop tube creates an airtight seal with the top of the S&B air box, once the hood is closed. Maximum ram air means better performance.
NEW AGGRESSIVE LOOK
Designed to mirror the OEM design, but also give you a stylish and more aggressive look.
NEW AGGRESSIVE LOOK
Designed to mirror the OEM design, but also give you a stylish and more aggressive look.
REQUIRES NO CUTTING OR DRILLING TO YOUR JEEP HOOD
Lightning fast installation time (30 minutes). The S&B Hood Scoops install easily into the stock hood vent locations requiring you to only trim the hood insulation to complete the install.
INJECTION MOLDED SILICONE GRILL PLUGS INCLUDED
If extreme weather conditions arise such as heavy snow, dust or other debris, grill plugs have been provided to prevent these elements from entering the hood scoops.
INJECTION MOLDED SILICONE GRILL PLUGS INCLUDED
If extreme weather conditions arise such as heavy snow, dust or other debris, grill plugs have been provided to prevent these elements from entering the hood scoops.
TESTED TO A HIGHER STANDARD
S&B tests to the internationally accepted ISO 5011 Standard when testing for airflow, efficiency, and capacity. For the Jeep Rubicon Hood scoops, we tested at the vehicles CFM at max horsepower with a 60 mph fan to simulate ram air. The results speak for themselves.
Choose Your Configuration
Hood Scoop Kit for S&B Jeep Intakes
This configuration is for those wanting to pair the Jeep Scoops with their S&B cold air intake kit. S&B cold air intake kit 75-5121 or 75-5129 is required. (sold separately)
Configuration Includes:
- Driver & Passenger Side Hood Scoops
- Hood Scoop Tube
- Silicone Grill Plugs
- Silicone Scoop Seal
- Silicone Check Valve
- Installation Hardware
Hood Scoop Only Kit
This configuration is intended for those who are running the OEM intake system or a non S&B aftermarket intake system. This configuration does not require an S&B Cold Air Intake system.
Configuration Includes:
- Driver & Passenger Side Hood Scoops
- Silicone Grill Plugs
- Installation Hardware
FAQS
The S&B Hood Scoops are designed to fit the 2018-2021 Wrangler JL and 2020-2021 Gladiator Rubicon hood and will be replacing the factory vents.
Included in the P/N AS-1014 kit is the full hood scoops assembly, including all items to replace both vents and connect to our S&B intakes for the 2.0L Turbo and 3.6L Gas (75-5121 and 75-5129)
The AS-1015 kit will solely replace both factory vents.
Original Mopar Hood p/n: 68281973AB
Original Mopar Vent p/n: 68293749AD (Drivers Side)
Original Mopar Vent p/n: 68293748AD (Passengers Side)
Absolutely not! Our Jeep Air Scoops require no cutting or drilling into your Jeep hood. The S&B Hood Scoops install easily into the stock hood vent locations requiring you to only trim the hood insulation to complete the install.
