66-6007

Replacement Filter for 2022-2024 Polaris RZR Pro R 2.0L

Sale price
$75.00 USD
Regular price
Unit price  per 
66-6007

Replacement Filter for 2022-2024 Polaris RZR Pro R 2.0L

Sale price
$75.00 USD
Regular price
Unit price  per 
Replaces 7082436.
In Stock!

Est. Delivery: ,
if ordered within hours and minutes
Not Shipping to ?
Filter type Dry Cleanable
YearMakeModelEngine
2022-2024PolarisRZR Pro RUTV

WARNING: This product can expose you to chemicals including carbon black, silica - crystalline, methylene chloride, and lead which are known to the State of California to cause cancer, and lead, which is known to the State of California to cause birth defects or other reproductive harm.

MORE INFO at www.P65warnings.ca..gov
Replacement Filter for 2022-2024 Polaris RZR Pro R 2.0L
Sale price
$75.00 USD
Regular price
Unit price  per 
Sale price
$75.00 USD
Regular price
Unit price  per 

S&B's Huge Dry, Cleanable Filter flows the best.

Using our proprietary dry synthetic media, our RZR filter flows better than stock and provides more air to the filter.

splide tile

FILTER MAINTENANCE CLEANING THIS FILTER IS AS EASY AS 1, 2, 3

Our RZR filter is super easy to clean. Just follow the steps below to breathe new life into your dirty filter. If the filter media or rubber looks damaged, do not reuse it.

splide tile
 

STEP 1

First, make sure to wear protective eyewear throughout the cleaning process. Remove the dirty air filter from the UTV's airbox and lightly tap the top several times on a hard service to knock out any debris, being careful not to bend the cage or pleats.

splide tile

STEP 2

Blow out the filter from the inside out using the nozzle no closer than 1" from the media. Continue to move the nozzle taking care not to focus it on one specific area. Use an OSHA-approved regulator at no more than 30psi.

splide tile

STEP 3

Use the nozzle to blow out the outside of the filter at an angle to remove any large debris that was not removed in Steps 1 and 2. Be careful not to blow debris back into the media. Then blow out once more from the inside out.

splide tile

STEP 4

Use a standard garden hose turned up to 75% of its max strength and wash the filter from the inside out.

splide tile

Step 5

Wash the outside of the filter to remove the remaining debris. Repeat steps 4 and 5 until the media is returned close to its original white color. Allow the filter to dry before use. A small fan can be used to accelerate the process. Do not use hot air.

splide tile

CUSTOMER REVIEWS